Choosing the right size is one of the most important steps when buying mobility products, support harnesses, or knee wraps for your dog. A good fit helps the product sit comfortably on your dog’s body and allows them to move, stand, sit, and rest more naturally.
Before you begin, use a soft measuring tape and let your dog stand in a relaxed position. If your dog prefers sitting, that can also work for some measurements. Try not to pull the tape too tightly. It should sit close to the body without pressing into the coat or skin.
Below are the key measurements you may need, depending on the product type.
Part 1: Measuring for Dog Wheelchair Products
For dog wheelchair products, the three main measurements are Dog’s Length, Dog’s Height, and Dog’s Width.
1. Dog’s Length
Measure from 
the middle of the hip to the middle of the shoulder along the side of your dog.
Keep the measuring tape level and close to the body. Your dog should be standing or sitting in a natural position, without stretching forward or curling up.
This measurement helps determine the correct frame length for a better overall fit.
2. Dog’s Height
Measure from the base of the front foot to the mid-shoulder area.
Your dog can be standing or sitting, as long as their body position is steady and natural. Make sure the tape runs vertically from the floor up to the shoulder area.
This measurement helps match the product height to your dog’s body size.
3. Dog’s Width
Measure the horizontal distance between the shoulders, or across the widest part of your dog’s front body.
Look at your dog from the front and measure from one side to the other. The tape should stay straight and horizontal.
This measurement helps ensure the product is not too narrow or too loose around the body.
Part 2: Measuring for Support Harnesses and Knee Wraps
For support harnesses and knee wrap products, the most useful measurements are Back Length, Neck Girth, and Abdomen Girth.
1. Back Length
Measure from the base of the neck to the base of the tail.
Place the tape along the top of your dog’s back. Your dog should be standing naturally, with the back as straight as possible.
This measurement is especially helpful for products that cover or connect across the body.
2. Neck Girth
Measure around the area where your dog’s collar would normally sit.
After measuring, allow an extra 1-2 cm for comfort. This gives your dog enough room to move naturally without the product feeling too tight.
As a quick check, you should usually be able to fit one or two fingers between the tape and your dog’s neck.
3. Abdomen Girth
Measure around the widest part of your dog’s abdomen.
For small dogs, allow an extra 1-2 cm. For medium and large dogs, allow an extra 2-3 cm.
This helps the product stay secure while still giving your dog enough space to sit, walk, and lie down comfortably.
Helpful Measuring Tips
For the most accurate result, measure your dog when they are calm and relaxed. If possible, ask another person to gently keep your dog still while you take the measurements.
A few simple tips can make the process easier:
- Use a soft measuring tape.
- Measure each area 2-3 times and use the most consistent result.
- Keep the tape close to the body, but not tight.
- If your dog has a thick coat, gently press the tape through the fur.
- Record measurements in centimetres first, then convert to inches if needed.
- If your dog is between two sizes, check the product size guide before choosing.
Final Thoughts
Accurate measurements make it much easier to choose the right size for your dog. Whether you are selecting a wheelchair product, a support harness, or a knee wrap, taking a few minutes to measure carefully can help create a more comfortable and secure fit.
Before placing your order, double-check all key measurements: Dog’s Length, Dog’s Height, Dog’s Width, Back Length, Neck Girth, and Abdomen Girth. Then compare them with the product size chart to find the best option for your dog.
0 comments